Energy is highly important in every industry. Every facility must have an efficient and reliable source of energy to keep it going. Notwithstanding, the electrical system must be properly installed to keep it safe from dangers. Errors in electrical system or equipment can pose dangers to everyone around. Hence, every facility must enforce safety practices, administrative controls and appropriate arc flash analysis to reduce chances of arc flash injuries.
The arc flash is described as electrical explosion that are typically arising from low electrical resistance of another voltage phase or the ground connection of an electrical system. This usually occurs when electrical current moves between two conducting surfaces or a separated electrical line. Among the most common causes are insulation failure, accidental contact, improper work processes, human error and other external factors that may cause the connections to snap.
Given with these facts, the National Fire Protection Association has established standards to ensure safety within the workplace. The Standard for Electrical Safety in the Workplace plays a major role in overall industrial safety measures which is designed to promote safety of the personnel and prevent possible equipment damages. Hence, it has to be followed religiously.
At present, arc flash synthesis and training are required in the electrical industry. Every company must facilitate training for the employees. Safety certification is required in every state before any entity can operate. This ensures that the workers fully understand and willingly apply the safety procedures they have to observe.
Various methods are constantly developed, tested and applied in different companies in an attempt to protect their valued assets. Thanks to the heightened awareness of the most common safety hazards. This may include proper calibration of electrical equipment, modifying existing designs and wearing of protective clothing and gears. Nonetheless, the best means of reducing electrical hazard in the workplace remains to be de-energizing of equipment during personnel interaction.
It is important to stick by the regulation not to operate live equipment higher than 50 volts. If it cannot be helped and the personnel have to work with energized equipment, he must conform with the strictest safety practices before performing the task. He has to wear the appropriate protective equipment, assess the risk, perform expert analysis and use the proper materials only.
Safe work procedures are designed to prevent injuries and issues related to arc flash. Proper labeling and observance of warning signs is a major precaution that must not be overlooked. It goes without saying that only a trained and qualified employee must perform the most critical jobs to avoid issues and mitigate any ill-effects.
PPE is essential in electrical works, too. The training program prepares the personnel with the knowledge on how to prevent potential hazards. Every employee must be made aware of the right materials and equipment used to avoid harm. The PPE includes appropriate flame-resistant gears, head protection, insulating gloves and face masks.
Workers and managements in this industry need to understand and perform arc flash analysis in order to prevent it and ensure safety. Understanding these things can provide ultimate protection from any electrical dangers and incidents. Most of all, following proper safety measures cost only a fraction of the effort when we perform our job.
The arc flash is described as electrical explosion that are typically arising from low electrical resistance of another voltage phase or the ground connection of an electrical system. This usually occurs when electrical current moves between two conducting surfaces or a separated electrical line. Among the most common causes are insulation failure, accidental contact, improper work processes, human error and other external factors that may cause the connections to snap.
Given with these facts, the National Fire Protection Association has established standards to ensure safety within the workplace. The Standard for Electrical Safety in the Workplace plays a major role in overall industrial safety measures which is designed to promote safety of the personnel and prevent possible equipment damages. Hence, it has to be followed religiously.
At present, arc flash synthesis and training are required in the electrical industry. Every company must facilitate training for the employees. Safety certification is required in every state before any entity can operate. This ensures that the workers fully understand and willingly apply the safety procedures they have to observe.
Various methods are constantly developed, tested and applied in different companies in an attempt to protect their valued assets. Thanks to the heightened awareness of the most common safety hazards. This may include proper calibration of electrical equipment, modifying existing designs and wearing of protective clothing and gears. Nonetheless, the best means of reducing electrical hazard in the workplace remains to be de-energizing of equipment during personnel interaction.
It is important to stick by the regulation not to operate live equipment higher than 50 volts. If it cannot be helped and the personnel have to work with energized equipment, he must conform with the strictest safety practices before performing the task. He has to wear the appropriate protective equipment, assess the risk, perform expert analysis and use the proper materials only.
Safe work procedures are designed to prevent injuries and issues related to arc flash. Proper labeling and observance of warning signs is a major precaution that must not be overlooked. It goes without saying that only a trained and qualified employee must perform the most critical jobs to avoid issues and mitigate any ill-effects.
PPE is essential in electrical works, too. The training program prepares the personnel with the knowledge on how to prevent potential hazards. Every employee must be made aware of the right materials and equipment used to avoid harm. The PPE includes appropriate flame-resistant gears, head protection, insulating gloves and face masks.
Workers and managements in this industry need to understand and perform arc flash analysis in order to prevent it and ensure safety. Understanding these things can provide ultimate protection from any electrical dangers and incidents. Most of all, following proper safety measures cost only a fraction of the effort when we perform our job.
About the Author:
If you want to know more about arc flash analysis click www.csiengservices.com. Control Solutions, Inc. Is an engineering and consulting company providing designing and integrating industrial solutions, and more info is available at http://www.csiengservices.com right now.
No comments:
Post a Comment